The following page was printed from RemoteCentral.com:
This Wiki entry is maintained by Remote Central members - so if you spot an error or have additional information, please update it!
| | | Brand: | Velodyne |
| Device Type: | Subwoofer |
| Model/Series: | DD-12 |
| Model Year: | Unknown |
| Information: | [Link: velodyne.com] |
| Configurations: | Search the file area |
| | | | | | | Dimensions: | 14.00" wide × 14.50" high × 15.50" deep 35.56 cm × 36.83 cm × 39.37 cm |
| | | | | | | Notes: | Digital Drive series. Firmware can be updated over serial. |
| |
|
|
|
Input Options
| | | Infrared: | Yes |
| IR Input Jack: | Yes |
| Radio Frequency: | No |
| RS-232 (Serial): | Yes |
| Network IP: | No |
| Bluetooth: | No |
| USB: | No |
| DC Trigger: | No |
| | | Output Ports
| | | IR Output Jack: | No |
| RS-232 Output: | Yes |
| DC Trigger: | No |
| |
| |
|
Discrete Codes
| |
| Power: | Yes |
| Inputs: | N/A |
| Sound Modes: | Yes |
| Picture Modes: | N/A |
| Screen Modes: | N/A |
| |
| Delays/Timings
| | | Power On: | Unknown |
| Switch Inputs: | Unknown |
| Inter-command: | Unknown |
| |
|
|
|
| Important Codes & Commands |
No codes have been added for this model.
|
|
No files have been uploaded for this model.
Use the red Wiki Toolbox below to upload a file! |
|
About this page...
This page contains information on how the Velodyne DD-12 can be controlled, along with useful tips, tricks and commands to make integrating this device into a universal remote control or other control system faster and more reliable.
This entry was last updated on Tuesday April 28, 2009 at 02:54 by Daniel Tonks.
| 
Comment by 
https://geometry-dashmeltdown.co